Shaped glass edge machining

100% productivity due to 0 setup time.

Ground or polished edges in shaped glass with top radii or chamfers with individual shape from quantity of 1 extremely profitable.

VSS

What is your target in individual manufacturing?

RS 89.07 Vario suction cup system (VSS)

Highlights

Fully automatic set-up, no vacuum suction cup replacement
Perfect edges over the entire circumference with freely programmable pocket and corner shapes.
Tool change outside the working area
Up to 60 pcs./hr. of ground glass of different sizes
Without user intervention, one piece of glass after the other with completely different dimensions
Ground or polished
Up to 60 pcs. per hour

A1 Auto-Read - program generation by reading barcode
A2 Auto-Trans - cut glass is transported into the work area
A3 Auto-Format - the glass is always in the correct position on the opened suction cups
A4 Auto-Profile - the profile of the glass edge is incorporated in the polishing disk
A5 Auto-Comp - the tools are measured in the process and corrected in the controller
A6 Auto-Cool - the tools are provided with plenty of cooling water directly at the contact point with the glass when it is needed, regardless of the tool diameter, the glass thickness and the contour point on the glass
A7 Auto-Sharp - diamond tools are sharpened on the sharpening stone in the process
A8 Auto-Dress - the polishing tools are continuously kept at a consistent profile depth, without intervention by employees

Glass size:	max 2300 x 1300 mm; min 250 x 250 mm (other sizes on request)
Glass thickness:	2 x -19 mm
Tolerance:	± 0.1 mm (to 1000 mm)
Grinding speed:	max 38m/min
Spindle:	frequency-controlled up to 18000 rpm
Spindle radial run-out:	<0.005 mm
Type of edge grinding:	circumference grinding e.g. C-edge, straight edge with seam, chamfer etc.
Tools:	Diamond grinding and polishing disks, ø 10 and ø 150 mm
Tool change:	Quick clamping device; optional automatic tool changer
Cooling	Multi-channel cooling for the use of different tools, e.g. ø 10 u. ø 150 mm, CNC controlled, without any change of material
Glass support:	Fixing to vacuum plate, self-opening, in automatically correct position
Loading:	by hand, outside the wet area, parallel to primary time